extender linksys com

Fix: Linksys Extender Not Broadcasting SSID or Wireless Network Name

So, you are have successfully set up your Linksys WiFi range extender! Now, you can connect multiple client devices to the extended WiFi network. However, to do so, there is need to allow your Linksys range extender to broadcast SSID or wireless network name, so that other devices can easily connect to the network. But what if your Linksys extender not broadcasting SSID? Not to worry at all!

Here, we will take the lid off from various hidden tactics to resolve the Linksys WiFi range extender not broadcasting SSID or wireless network name issue. Let’s take the plunge.

Tips to Solve Linksys Extender Not Broadcasting SSID

1. Power Cycle Your WiFi Extender and Router

In order to kick-start your WiFi network without wiping off any customized wireless settings, perform a power cycle. To get the job done, turn off your WiFi router and Linksys extender by unplugging their power cords.

Once done, wait for some time. After that, plug your extender and then the router back in and turn them on.

2. Check if the Settings of Linksys Extender and Router are Same

The extender’s default web-based setup page helps you manage the configuration of your Linksys range extender. Launch an internet browser of your choice and log into the web-based setup page of your Linksys WiFi range extender.

After logging in, make sure that the extender has the same settings as that of your router. For instance, if you own a Linksys RE6300 extender, then check if the Linksys RE6300 setup password is the same as that of your router. In addition to the password, cross-check other settings as well, especially the security mode, channel width, and network name (SSID).

3. Check if Your PC Can Ping the Extender

In order to perform a Ping Test, open the Command Prompt or Run window (Windows) and Ping feature (Mac) on your computer. Keep in mind that the extender must be connected to the home WiFi router using an Ethernet cable before performing the test.

To ping the Linksys extender, you have to obtain its IP address which can be found in the DHCP Client Table of your router’s web-based setup page. As soon as you have the extender’s IP address, execute a ping test.

The Ping Test pushes your system to send a message to the extender. The usual rule is that in case the system receives a reply, it means that your device is up and running and there is a connection between your extender and router. On the other hand, if it doesn’t, you can either do a power cycle to refresh your network or reset the extender to configure it completely.

4. Reset Your Linksys WiFi Extender

None of the above-mentioned solutions fixed the Linksys extender not broadcasting SSID issue for you? Fret not! Consider resetting your WiFi range extender to the default factory settings.

All you need to do is simply press and hold the Reset button on your Linksys extender. As soon as the power LED becomes visible, it indicates that the Linksys extender reset is successful.

Quick Tip:

You can also reset your Linksys extender via extender linksys com web-based setup page.

And with this step, your Linksys extender not broadcasting SSID or wireless network name issue has been resolved. If you are still facing the same issue, feel free to get in touch with our experts.