WiFi mesh systems due to their top-notch performance have grabbed millions of eyes. Linksys Velop WiFi mesh system is every tech-lovers first choice. You get high-speed internet through every corner of your home using the Linksys Velop home wireless system. Nevertheless, as every technical device is prone to some issues, you may sometimes encounter glitches with Linksys Velop either. Users have often reported issues with their Velop which is mostly indicated by a red light on the device. But the good news is that in most cases using simple troubleshooting steps, the problem gets resolved. We have compiled a list of tried and tested troubleshooting hacks in this guide that will help fix the Linksys Velop red light issue. Read further to know more.
Linksys Velop Red Light: Meaning
This guide covers the Linksys Velop red light issue reasons as well as solutions. Let us first understand the causes that lead to Velop showing a red light. Every LED on the Velop has a different meaning. Lights show the current status of the device. If you see a solid red LED glowing on the Velop, this indicates there is an issue with the internet connection. The blinking red light on the node implies a connectivity issue with nodes. However, the blinking red light on the primary node implies trouble connecting to the main access point.
Now that you got an idea about different lights meaning let us help you set it right.
Linksys Velop Red Light Issue [Resolved]
Below given are some tested solutions that you can try to fix this issue. We are pretty sure that by the time you read the last hack listed in this guide, the issue would have been resolved. However, know that you always have the opportunity to skip the entire toil by simply getting in touch with our expert team and letting them handle the situation in a hassle-free manner. But if you are resolute to get involved in troubleshooting on your own, then without wasting a minute, proceed with these hacks.
1) Verify Power Supply
Please check if the power sockets that your devices are connected to are free from damage. Also, check there is an adequate power supply to the devices. Consider trying another power socket in case you find any issues with the current wall sockets. Get the help of a UPS to fix power supply-related troubles.
2) Check Cables
A loose connection is a major reason for Linksys Velop red light issue. Make a check on all the cables that are connected to the Velop router and nodes. Get the damaged cable replaced immediately and make firm connections between the devices. Try disconnecting and connecting them again.
3) Reboot Velop
Rebooting the device is efficient enough to fix any temporary technical hitches with it. Thus unplug the Linksys Velop router from the power source and let it be like this for a while. Plug it back and check whether the Linksys Velop red light issue has climbed off your back. If it still seems adamant to leave you, then move to hack#4.
4) Place Wired Connection
As mentioned earlier, Linksys Velop red light indicates network issues, this means the router is not receiving an adequate internet signal. So, if you have a wireless connection in place earlier, try shifting to a wired connection now. Know that there is nothing wrong with a wireless connection; however, a wired connection is much more reliable all the time. Thus, use an Ethernet cable that is in good condition and connect the Velop router to the modem. While doing so, make sure that you are inserting the cable correctly into the respective ports. Once done, check if the Velop red light issue gets fixed or not. If the issue persists, then seems you need to go another extra mile to work it out.
5) Reset Velop
This is one of the final solutions in most cases. Post this, the Linksys red light should bid you goodbye forever. This is so because after resetting every single customized setting will get erased from the Velop system. It will be as good as a new device. Once reset is done, you need to set it up from scratch once again and begin accessing its seamless internet. To reset, press the Reset button on the router. However, make sure that it is connected to a power source for sure.
So, you have seen all the troubleshooting hacks mentioned in this guide are straightforward and quite easy to be performed. By now the Linksys Velop red light issue would have left you for sure. In case, you still need some assistance, contact our experts.